Repair Procedures: Replacement
[Steering Column Shroud Upper Panel]
CAUTION:
- Put on gloves to protect your hands.
NOTE:
- When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape and apply protective tape around the related parts to prevent damage.
- Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
- Take care NOT to bend or scratch the trim and panels.
- Lower the steering wheel.
- Using a screwdriver or remover, remove the steering column shroud upper panel (A).
- Install in the reverse order of removal.
Information
- Replace any damage clips.
[Steering Column Shroud Lower Panel]
CAUTION:
- Put on gloves to protect your hands.
NOTE:
- When prying with a flat-tip screwdriver, wrap it with protective tape and apply protective tape around the related parts to prevent damage.
- Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
- Take care NOT to bend or scratch the trim and panels.
- Remove the crash pad lower panel.
(Refer to: Crash Pad - "CRASH PAD LOWER PANEL ").
- After loosening the mounting screws, remove the steering column shroud lower panel (A).
- Install in the reverse order of removal.
Information
- Replace any damaged clips.