Repair Procedures: Replacement

CAUTION:

Put on gloves to protect your hands.

NOTE:

When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape and apply protective tape around the related parts to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care NOT to bend or scratch the trim and panels.

Using a screwdriver or remover, remove the crash pad side cover (A).
[LH]

Fig 1: Removing Crash Pad Side Cover Using Screwdriver Or Remover (LH)
Courtesy of HYUNDAI MOTOR AMERICA

[RH]

Fig 2: Removing Crash Pad Side Cover Using Screwdriver Or Remover (RH)
Courtesy of HYUNDAI MOTOR AMERICA
Install in the reverse order of removal.
Information
- Replace the side cover when the self clip is damaged because the side cover is equipped the self clip.