LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2015 >> Elantra Sport, Automatic Trans >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brake & Drum Brake System >> Rear Disc Brake >> Repair procedures >> Inspection >> Rear Brake Pad Check

Rear Brake Pad Check

  1. Check the pad wear. Measure the pad thickness and replace it, if it is less than the specified value.

    Pad thickness 

    Standard value: 10 mm (0.394 in)

    Service limit: 2.0 mm (0.0787 in)

  2. Check the damage of pad, backing metal and contamination with grease.
scientia non olet · About LEMON Manuals