Repair procedures: Installation

Installation is the reverse of removal.
Use a SST (09581-11000) when installing the brake caliper assembly.

Fig 1: Installing Brake Caliper Assembly Using SST (09581-11000)
Courtesy of HYUNDAI MOTOR AMERICA
After installation, bleed the brake system.
(Refer to "BRAKE SYSTEM BLEEDING ")
CAUTION:
- Do not hit piston end by hammer or prying directly against piston face with screwdriver to push in piston.
- Using wood or used pad to protect piston end and pushing the wood or pad is recommended.
- When spreading a piston, SST should be cover all area of piston end face.