LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2015 >> Elantra Sport, Automatic Trans >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brake & Drum Brake System >> Brake Switch >> Repair procedures >> Removal

Repair procedures: Removal

  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Remove the lower crash pad.

    (Refer to "CRASH PAD ")

  3. Disconnect the stop lamp switch connector (A).
    Fig 1: Stop Lamp Switch Connector
    G10530689Courtesy of HYUNDAI MOTOR AMERICA
  4. Pull the locking plate (A) as indicated by the arrow.
    Fig 2: Pulling Locking Plate
    G10530690Courtesy of HYUNDAI MOTOR AMERICA
  5. Turn stop lamp switch 45° counterclockwise and remove it.
    Fig 3: Turning Stop Lamp Switch Counterclockwise
    G10530691Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals