Repair procedures: Replacement

CAUTION:

When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Take care not to scratch the body surface.
Put on gloves to protect your hands.

After loosening the mounting screws, then remove the steering column shroud panel (A).

Fig 1: Steering Column Shroud Panel
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the connector (A).

Fig 2: Connector
Courtesy of HYUNDAI MOTOR AMERICA
Installation is the reverse of removal.
NOTE:
- Make sure the connector are connected in properly.
- Replace any damaged clips.