LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2014 >> Genesis Coupe 2.0T, Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Interior >> Crash Pad >> Repair Procedures >> Replacement >> Crash Pad Lower Panel Replacement

Crash Pad Lower Panel Replacement

NOTE:
  • When prying with a flat-up screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
  • Take care not to scratch the body surface.
  • Put on gloves to protect your hands.
  1. Using a screwdriver or remover, remove the crash pad side cover (A).
    Fig 1: Identifying Crash Pad Side Cover
    G06513478Courtesy of HYUNDAI MOTOR CO.
  2. After loosening the crash pad lower panel mounting screws, then remove the lower panel (A).
    Fig 2: Identifying Lower Panel & Mounting Screws
    G06513479Courtesy of HYUNDAI MOTOR CO.
  3. Disconnect the crash pad lower switch connectors (A).
    Fig 3: Identifying Connectors
    G06513480Courtesy of HYUNDAI MOTOR CO.
  4. Disconnect the start/stop button connector (A).
    Fig 4: Identifying Start/Stop Button Connector
    G06513481Courtesy of HYUNDAI MOTOR CO.
  5. Disconnect the diagnosis connector (A).
    Fig 5: Identifying Diagnosis Connector
    G06513482Courtesy of HYUNDAI MOTOR CO.
  6. Installation is the reverse of removal.
NOTE:
  • Make sure the connectors are connected properly.
  • Replace any damaged clips.
scientia non olet · About LEMON Manuals