LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2014 >> Genesis Coupe 2.0T, Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Indicators And Gauges >> Instrument Cluster >> Repair Procedures >> Inspection >> Speedometer

Repair Procedures: Inspection: Speedometer

  1. Adjust the pressure of the tires to the specified level.
  2. Drive the vehicle onto a speedometer tester. Use wheel chocks (A) as appropriate.
  3. Check if the speedometer indicator range is within the standard values.
    CAUTION: Do not operate the clutch suddenly or increase/decrease speed rapidly while testing.
    NOTE: Tire wear and tire over or under inflation will increase the indication error.
    Fig 1: Identifying Wheel Chocks
    G06513793Courtesy of HYUNDAI MOTOR CO.

    [km/h - Canada] 

    SPEEDOMETER VELOCITY AND TOLERANCE CHART - KM/H (CANADA)

    Velocity (km/h) 20 40 60 80 100 120 140
    Tolerance (km/h) +3.0 +3.3 +3.4 +3.8 +4.1 +4.9 +5.2
    0 0 0 0 0 0 0
    Velocity (km/h) 160 180 200 220 240 260 280
    Tolerance (km/h) +5.7 +6.2 +6.5 +6.7 +6.9 +7.1 +7.3
    0 0 0 0 0 0 0

    [MPH-USA] 

    VELOCITY AND TOLERANCE CHART - MPH (USA)

    Velocity (MPH) 10 20 40 60 80
    Tolerance (MPH) +2.3 +2.4 +2.5 +2.6 +2.7
    0 0 0 0 0
    Velocity (MPH) 100 120 140 160  
    Tolerance (MPH) +2.8 +2.9 +3.0 +3.3  
    0 0 0 0  
scientia non olet · About LEMON Manuals