LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2013 >> Veloster Base, Standard Trans >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Indicators & Gauges >> Instrument Cluster >> Repair Procedures >> Inspection >> Seat Belt Switch

Seat Belt Switch

  1. Remove the connector from the switch.
  2. Check for continuity between terminals.
    Seat belt condition Continuity
    Fastened Non-conductive (∞Ω)
    Not fastened Conductive (Ω)
    Fig 1: Identifying Seat Belt Switch
    G09135133Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals