Crash Pad Driver's Panel Replacement (LH)

Remove the crash pad side cover.
After loosening the mounting screws, then remove the lower panel (A).
Disconnect the diagnosis connector (B).

Fig 1: Identifying Lower Panel And Diagnosis Connector
Courtesy of HYUNDAI MOTOR CO.
Remove the cluster fascia panel (A).

Fig 2: Identifying Cluster Fascia Panel
Courtesy of HYUNDAI MOTOR CO.
Using a screwdriver, remover the crash pad switch assembly (A).
Disconnect the connectors (B).

Fig 3: Identifying Electrical Connectors
Courtesy of HYUNDAI MOTOR CO.
After loosening the mounting screws, then remove the crash pad driver's panel (A).

Fig 4: Identifying Crash Pad Driver's Panel
Courtesy of HYUNDAI MOTOR CO.
Disconnect the connector (B).

Fig 5: Identifying Electrical Connector
Courtesy of HYUNDAI MOTOR CO.
Installation is the reverse the removal.