LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Tucson GL, Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Indicators & Gauges >> Instrument Cluster >> Repair Procedures >> Inspection >> Speedometer

Repair Procedures: Inspection: Speedometer

  1. Adjust the pressure of the tires to the specified level.
  2. Drive the vehicle onto a speedometer tester. Use wheel chocks (A) as appropriate.

    [2WD] 

    Fig 1: Identifying Vehicle Onto Speedometer Tester (2WD)
    G06873702Courtesy of HYUNDAI MOTOR CO.

    [4WD] 

    Fig 2: Identifying Vehicle Onto Speedometer Tester (4WD)
    G06873703Courtesy of HYUNDAI MOTOR CO.
  3. Check if the speedometer indicator range is within the standard values.
    CAUTION: Do not operate the clutch suddenly or increase/decrease speed rapidly while testing.
    NOTE: Tire wear and tire over or under inflation will increase the indication error.

    [CANADA - km/h] 

    Velocity (km/h) 20 40 60 80 100 120
    Tolerance (km/h) +3.00 +3.00 +3.40 +3.80 +4.10 +4.90
    Velocity (km/h) 140 160 180 200 220 -
    Tolerance (km/h) +5.20 +5.70 +6.20 +6.50 +6.70 -

    [USA - MPH] 

    Velocity (MPH) 10 20 40 60
    Tolerance (MPH) +2.30 +2.40 +2.50 +2.60
    Velocity (MPH) 80 100 120 140
    Tolerance (MPH) +2.70 +2.80 +2.90 +3.00
scientia non olet · About LEMON Manuals