Component inspection
- Substitute with a known - good head lamp and check for proper operation.
- Is normal status after replace Headlamp?
YES
- Substitute with a known - good head lamp and check for proper operation. If the problem is corrected, replace head lamp and go to "VERIFICATION OF VEHICLE REPAIR " procedure.
NO
- Fault is intermittent and caused either by poor contact in connectors or wiring harness, or it has been repaired and AFLS ECU memory is not cleared yet. Thoroughly check all connectors (and connections) for looseness, bending, corrosion, contamination, deterioration, and/or damage.
- Repair or replace as necessary and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.