Repair procedures: Inspection: Speedometer
- Adjust the pressure of the tires to the specified level.
- Drive the vehicle onto a speedometer tester. Use wheel chocks as appropriate.
- Check if the speedometer indicator range is within the standard values.CAUTION: Do not operate the clutch suddenly or increase/decrease speed rapidly while testing.NOTE: Tire wear and tire over or under inflation will increase the indication error.
SPEEDOMETER INDICATOR RANGE (KPH-CANADA)
| Velocity (km/h) | 20 | 40 | 60 | 80 | 100 |
| Tolerance (km/h) | +3.0 +0.4 |
+3.4 +0.9 |
+3.8 +1.4 |
+4.4 +1.8 |
+5.4 +2.4 |
| Velocity (km/h) | 120 | 140 | 160 | 180 | 200 |
| Tolerance (km/h) | +6.2 +3.0 |
+7.0 +3.6 |
+7.8 +4.0 |
+8.8 +4.4 |
+9.8 +4.8 |
| Velocity (km/h) | 220 | 240 | 260 | ||
| Tolerance (km/h) | +10.8 +5.2 |
+11.8 +5.6 |
+12.8 +6.0 |
SPEEDOMETER INDICATOR RANGE (MPH-USA)
| Velocity (MPH) | 10 | 20 | 40 | 60 | 80 |
| Tolerance (MPH) | +2.0 +0.2 |
+2.4 +0.5 |
+2.8 +1.0 |
+3.2 +1.5 |
+4.3 +1.8 |
| Velocity (MPH) | 100 | 120 | 140 | 160 | |
| Tolerance (MPH) | +5.4 +2.3 |
+6.4 +2.8 |
+7.6 +3.2 |
+8.8 +3.6 |