Parking Brake Switch (EPB SW)

The parking brake switch (A) is a EPB switch type. It is located at the lower crash panel.

(Refer to Brake system - "EPB SWITCH ")

1. Check resistance between the terminal and switch body with the switch (A) ON.
   Fig 1: Parking Brake Switch Terminal Position Chart

   Courtesy of HYUNDAI MOTOR AMERICA
2. Check resistance between the terminal and switch body with the switch OFF.

   If it's is not as specified, replace the switch or inspect its ground connection.

   Fig 2: Locating Switch Body

   Courtesy of HYUNDAI MOTOR AMERICA