LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Elantra GLS, Standard Trans >> Labor Times >> Other Variant >> Brakes >> Mechanical - Hydraulic >> Brake Shoes &/Or Pads >> Remove & Replace

Brake Shoes &/Or Pads: Remove & Replace

WARNING: This page is about the Elantra GLS, Automatic Trans, which is a different variant/trim than selected.
Includes: Clean, lube and/or replace Brake Hardware as necessary. Adjust Brakes (where applicable). Includes: Repack Wheel Bearings (where applicable). DOES NOT include refinishing.

Applies ToNoteStandard HoursWarranty HoursSkill Level
All,Both Axles,w/Rear Disc Brakes1.8B
All,Both Axles,w/Rear Drum Brakes2.2B
Front,Both Sides1.00.4B
Rear,Both Sides,w/Disc Brakes1.00.4B
Rear,Both Sides,w/Drum Brakes1.40.8B
Combination Procedure: CALIPER: Overhaul:
Includes: Bleed System.
One0.8B
Combination Procedure: CALIPER: Replace:
Includes: Bleed System.
One0.6B
Combination Procedure: PARKING BRAKE SHOE & LINING: Replace:
Each Side0.2B
Combination Procedure: WHEEL BEARING: Replace:
Includes: Repack Bearings (where applicable).
Front,Both Sides.1.61.3B
Front,One Side0.90.7B
Rear,Both Sides.1.61.2B
Rear,One Side0.90.7B