LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Elantra GLS, Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Interior Trim & Instrument Panel >> Windshield Glass >> Repair procedures >> Replacement >> Removal

Repair procedures: Replacement: Removal

NOTE:
  • Put on gloves to protect your hands.
  • Use seat covers to avoid damaging any surfaces.
  1. Remove the following items.
    1. Front pillar trim

      (Refer to the "INTERIOR TRIM ")

    2. ECM mirror

      (Refer to the "MIRROR ")

    3. Rain sensor

      (Refer to the WINDSHIELD WIPER SYSTEM & WASHER SYSTEM )

    4. Auto defog sensor

      (Refer to the AUTO DEFOGGING SENSOR )

    5. Windshield wiper arm

      (Refer to the "COWL TOP COVER ")

    6. Cowl top cover

      (Refer to the "COWL TOP COVER ")

  2. Cut out the windshield sealant using the sealant cutting tool (09861-31100).
    Fig 1: Cutting Out Windshield Sealant Using Sealant Cutting Tool
    G07264873Courtesy of HYUNDAI MOTOR CO.
    NOTE:
    • Do not scrape down to the painted surface of the body; damaged paint will interfere with proper bonding.
    • Remove the rubber dam and fasteners from the body.
    • Mask off surrounding surfaces before painting.
  3. Remove the windshield glass (B) carefully using the glass holder (A).
    Fig 2: Removing Windshield Glass Using Glass Holder
    G07264874Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals