LEMON Manuals
: Even more car manuals for everyone
Home
>>
Hyundai
>>
2012
>>
Elantra GLS, Automatic Trans
>>
Repair and Diagnosis
>>
Accessories & Equipment
>>
Gauges & Instrument Panels
>>
Interior Trim & Instrument Panel
>>
Roof Trim
>>
Repair procedures
>>
Replacement
>>
Vanity Lamp Replacement
Vanity Lamp Replacement
Using a screwdriver or remover, remove the vanity lamp (A).
Disconnect the vanity lamp connector (B).
Fig 1: Vanity Lamp & Vanity Lamp Connector
Courtesy of HYUNDAI MOTOR CO.
Installation is the reverse of removal.
NOTE:
Make sure the connector is plugged in properly.