LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Azera V6-3.3L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Seals and Gaskets >> Rear Crankshaft Main Bearing Seal >> Service and Repair >> Repair Procedures

Repair Procedures





Removal

1. Remove the drive plate.

2. Remove the rear oil seal (A).






Installation

1. Using SST(09231-3C200, 09231-H1100), install the rear oil seal.





NOTE:
Always use new oil seal.

2. Install the drive plate.

scientia non olet · About LEMON Manuals