LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Accent GLS, Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Indicators & Gauges >> Instrument Cluster >> Repair procedures >> Inspection >> Trip Switch

Trip Switch

  1. Disconnect the negative (-) battery terminal.
  2. Remove the trip switch (A) from the cluster fascia panel.
    Fig 1: Identifying Trip Switch Connector Terminals
    G08803375Courtesy of HYUNDAI MOTOR AMERICA
  3. Check for continuity between the terminals in each switch position according to the table.
    Fig 2: Trip Switch Connector Continuity Chart
    G08803376Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals