LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Accent GLS, Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Indicators & Gauges >> Instrument Cluster >> Repair procedures >> Inspection >> Speedometer

Repair procedures: Inspection: Speedometer

  1. Adjust the pressure of the tires to the specified level.
  2. Drive the vehicle onto a speedometer tester. Use wheel chocks (A) as appropriate.
  3. Check if the speedometer indicator range is within the standard values.
    CAUTION: Do not operate the clutch suddenly or increase/decrease speed rapidly while testing.
    NOTE: Tire wear and tire over or under inflation will increase the indication error.
    Fig 1: Driving Vehicle Onto Speedometer Tester Using Wheel Chocks
    G08803366Courtesy of HYUNDAI MOTOR AMERICA
    VEHICLE SPEED [KM/H]

    Velocity (km/h) Tolerance (km/h) Velocity (km/h) Tolerance (km/h)
    20 +4.3
    +1.3    		 140 +6.2
    +3.2
    40 +4.5
    +1.5    		 160 +7.4
    +4.4
    60 +4.6
    +1.6    		 180 +7.5
    +4.5
    80 +4.8
    +1.8    		 200 +7.6
    +4.6
    100 +5.9
    +2.9    		 220 +7.8
    +4.8
    120 +6.1
    +3.1    		 - -
    VEHICLE SPEED [MPH]

    Velocity (mph) Tolerance (mph)
    20 +2.3
    +0.3
    40 +2.5
    +0.5
    60 +2.6
    +0.6
    80 +2.8
    +0.8
    100 +2.9
    +0.9
    120 +3.1
    +1.1
    140 +3.2
    +1.2
scientia non olet · About LEMON Manuals