Repair procedures: Replacement: [Passenger's]

Fig 1: Identifying Passenger Wiring Connector

Courtesy of HYUNDAI MOTOR CO.

1. 5. Disconnect the antenna connector (A).
   Fig 2: Identifying Antenna Connector

   Courtesy of HYUNDAI MOTOR CO.
2. 6. Disconnect the connector (B).
3. 7. Disconnect the clips and then remove the roof trim (A).
   Fig 3: Identifying Roof Trim And Connector

   Courtesy of HYUNDAI MOTOR CO.
4. 8. Installation is the reverse of removal.
   NOTE:

   • Replace any damage clips.