Cowl Cross Bar Assembly Replacement

Remove the following items.
1. Front seat
  (Refer to the FRONT SEAT .)
2. Floor console
  (Refer to the CONSOLE .)
3. Crash pad
4. Cowl top cover
  (Refer to the COWL TOP COVER .)
Disconnect the blower unit connectors (A).
(Refer to the BLOWER .)

Fig 1: Identifying Blower Unit Connector
Courtesy of HYUNDAI MOTOR CO.

Fig 2: Identifying Blower Unit Connector
Courtesy of HYUNDAI MOTOR CO.
Disconnect the connectors

Fig 3: Identifying Electrical Connectors
Courtesy of HYUNDAI MOTOR CO.
Disconnect the airbag (A) and antenna (B) connectors.

Fig 4: Identifying Airbag And Antenna
Courtesy of HYUNDAI MOTOR CO.
Push the lock pin, disconnect the driver's wiring connectors.
Using a screwdriver, remove the wiring cover (A).

Fig 5: Identifying Wiring Cover
Courtesy of HYUNDAI MOTOR CO.
Push the lock pin, disconnect the passenger's wiring connectors.
Using a screwdriver, remove the wiring cover (A).

Fig 6: Identifying Wiring Cover
Courtesy of HYUNDAI MOTOR CO.
Disconnect the connector mounting clip (A).