Repair procedures: Replacement: [Passenger's]

Fig 1: Identifying Passenger Crash Pad Side Cover

Courtesy of HYUNDAI MOTOR CO.

1. 2. Installation is the reverse of removal.

Fig 1: Identifying Passenger Connector Mounting Clip

Courtesy of HYUNDAI MOTOR CO.

1. 10. Remove the cowl top cover.

   (Refer to the COWL TOP COVER .)

2. 11. Loosen the mounting bolts.
   Fig 2: Identifying Mounting Bolts

   Courtesy of HYUNDAI MOTOR CO.
3. 12. After loosening the mounting bolts and nuts, then remove the cowl cross bar (A).
   Fig 3: Identifying Cowl Cross Bar

   Courtesy of HYUNDAI MOTOR CO.
4. 13. Installation is the reverse of removal.
   NOTE:

   • Put on gloves to protect your hands.
   • Make sure the connectors are plugged in properly.