Repair procedures: Inspection: Speedometer
- Adjust the pressure of the tires to the specified level.
- Drive the vehicle onto a speedometer tester. Use wheel chocks (A) as appropriate.
[2WD]
[4WD]
- Check if the speedometer indicator range is within the standard values.CAUTION: Do not operate the clutch suddenly or increase/ decrease speed rapidly while testing.NOTE: Tire wear and tire over or under inflation will increase the indication error.
[CANADA - km/h]
VELOCITY CHARTVelocity (km/h) 20 40 60 80 100 120 Tolerance (km/h) +3.0 0 +3.0 0 +3.4 0 +3.8 0 +4.1 0 +4.9 0 Velocity (km/h) 140 160 180 200 220 - Tolerance (km/h) +5.2 0 +5.7 0 +6.2 0 +6.5 0 +6.7 0 - [USA - MPH]
VELOCITY CHARTVelocity (MPH) 10 20 40 60 Tolerance (MPH) +2.3 0 +2.4 0 +2.5 0 +2.6 0 Velocity (MPH) 80 100 120 140 Tolerance (MPH) +2.7 0 +2.8 0 +2.9 0 +3.0 0