Repair Procedures: Replacement

Remove the rear wheel & tire.
Tightening Torque:

88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)

CAUTION: Be careful not to damage to the hub bolts when removing the rear wheel & tire.
Loosen the nut and then remove the rear stabilizer link (B) with the rear lower arm (A).
Tightening Torque:

98.1 ~ 117.7 N.m (10.0 ~ 12.0 kgf.m, 72.3 ~ 86.8 lb-ft)

Fig 1: Identifying Rear Stabilizer Link And Rear Lower Arm
Courtesy of HYUNDAI MOTOR CO.
Loosen the nut and then remove the stabilizer link (A) with the rear stabilizer bar.
Tightening Torque:

98.1 ~ 117.7 N.m (10.0 ~ 12.0 kgf.m, 72.3 ~ 86.8 lb-ft)

Fig 2: Identifying Stabilizer Link And Rear Stabilizer Bar
Courtesy of HYUNDAI MOTOR CO.
Loosen the mounting bolt and then remove the stabilizer bar (B) with the sub frame (A).
Tightening Torque:

44.1 ~ 53.9 N.m (4.5 ~ 5.5 kgf.m, 32.5 ~ 39.8 lb-ft)

Fig 3: Identifying Stabilizer Bar And Sub Frame
Courtesy of HYUNDAI MOTOR CO.
Installation is the reverse of removal.