LEMON Manuals
: Even more car manuals for everyone
Home
>>
Hyundai
>>
2011
>>
Sonata GLS, Automatic
>>
Repair and Diagnosis
>>
Body & Frame
>>
Exterior Body Panels
>>
Exterior Body Panels - Except HEV
>>
Trunk Lid
>>
Repair Procedures
>>
Replacement
>>
Key Holder Replacement
Key Holder Replacement
Remove the trunk lid trim.
Disconnect the inside handle cable (A), then loosen the key holder (B) mounting bolts and remove.
Fig 1: Identifying Inside Handle Cable And Key Holder
Courtesy of HYUNDAI MOTOR CO.
Installation is the reverse of removal.