LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2011 >> Sonata GLS, Automatic >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Exterior Body Panels - Except HEV >> Rear Door >> Repair Procedures >> Replacement >> Outside Handle Replacement

Outside Handle Replacement

  1. After loosening the mounting bolt, then remove the outside handle cover (A).

    Tightening torque: 

    0.7 ~ 0.5 N.m (0.07 ~ 0.1 kgf.m, 1.0 ~ 0.7 lb-ft)

    Fig 1: Identifying Outside Handle Cover
    G07359480Courtesy of HYUNDAI MOTOR CO.
  2. Remove the outside handle (A) by sliding it rearward.
    Fig 2: Identifying Outside Handle
    G07359481Courtesy of HYUNDAI MOTOR CO.
  3. Installation is the reverse of removal.
scientia non olet · About LEMON Manuals