LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2011 >> Sonata GLS, Automatic >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Exterior Body Panels - Except HEV >> Hood >> Repair Procedures >> Replacement >> Hood Release Handle Replacement

Hood Release Handle Replacement

  1. Using a socket (B), remove the hood release handle (A).
    Fig 1: Removing Hood Release Handle Using Socket
    G07359431Courtesy of HYUNDAI MOTOR CO.
  2. Installation is the reverse of removal.
    NOTE:
    • Make sure the hood latch cable is connected properly.
    • Make sure the hood locks/unlocks and opens/closes properly.
scientia non olet · About LEMON Manuals