Hood Latch Replacement

Remove the front bumper cover.
(Refer to the "FRONT BUMPER ")
Detach the clips, then remove hood latch cover (A).

Fig 1: Identifying Hood Latch Cover
Courtesy of HYUNDAI MOTOR CO.
Remove the hood latch (A) mounting bolts.
Tightening torque:

7.8~11.8 N.m (0.8~1.2 kgf.m, 5.8~8.7 lb-ft)

Fig 2: Identifying Hood Latch
Courtesy of HYUNDAI MOTOR CO.
Disconnect the hood latch cable (A) and remove the latch (B).

Fig 3: Identifying Hood Latch Cable And Latch
Courtesy of HYUNDAI MOTOR CO.
Installation is the reverse of removal.
NOTE:
- Make sure the hood latch cable is connected properly.
- Make sure the hood locks/unlocks and opens/closes properly.