LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2011 >> Sonata GLS, Automatic >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Exterior Body Panels - Except HEV >> Front Door >> Repair Procedures >> Replacements >> Outside Handle Replacement

Outside Handle Replacement

  1. After loosening the mounting bolt, then remove the outside handle cover (A).

    Tightening torque: 

    0.7~0.5 N.m (0.07~0.1 kgf.m, 1.0~0.7 lb-ft)

    Fig 1: Identifying Outside Handle Cover
    G07359461Courtesy of HYUNDAI MOTOR CO.
  2. Remove the outside handle (A) by sliding it rearward.
    Fig 2: Identifying Outside Handle
    G07359462Courtesy of HYUNDAI MOTOR CO.
  3. Disconnect the connector (A).
    Fig 3: Identifying Outside Handle Connector
    G07359463Courtesy of HYUNDAI MOTOR CO.
  4. Installation is the reverse of removal.
    NOTE:
    • Make sure the door locks/unlocks and opens/closes properly.
scientia non olet · About LEMON Manuals