LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2011 >> Sonata GLS, Automatic >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Exterior Body Panels - Except HEV >> Fender >> Repair Procedures >> Replacement

Repair Procedures: Replacement

NOTE:
  • Be careful not to damage the hood and body.
  • Use a clip remover when removing clips.
  1. Remove the front bumper.

    (Refer to the "FRONT BUMPER ")

  2. Loosen the mud guard mounting screws.
    Fig 1: Identifying Mud Guard Mounting Screws
    G07359421Courtesy of HYUNDAI MOTOR CO.
  3. After loosening the mounting screws and clips, then remove the side sill garnish (A).
    Fig 2: Identifying Side Sill Garnish
    G07359422Courtesy of HYUNDAI MOTOR CO.
  4. After loosening the mounting screw and bolt, then remove the front bumper side mounting bracket (A).
    Fig 3: Identifying Front Bumper Side Mounting Bracket
    G07359423Courtesy of HYUNDAI MOTOR CO.
  5. After loosening the fender mounting screw and bolts, then remove the fender (A).
    Fig 4: Identifying Fender Mounting Screw And Bolts
    G07359424Courtesy of HYUNDAI MOTOR CO.
  6. Installation is the reverse of removal.
scientia non olet · About LEMON Manuals