Repair Procedures: Replacement

NOTE:

Put on gloves to protect your hands.
When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
Take care not bend or scratch the cover and other parts.

Remove the mounting clips.

Fig 1: Identifying Front Bumper Mounting Clips
Courtesy of HYUNDAI MOTOR CO.
Remove the radiator upper cover mounting clips.

Fig 2: Identifying Radiator Upper Cover Mounting Clips
Courtesy of HYUNDAI MOTOR CO.
After loosening the front bumper side's mounting screw, then disconnect the side's.

Fig 3: Locating Front Bumper Side's Mounting Screw
Courtesy of HYUNDAI MOTOR CO.
Remove the front bumper after pull out the front bumper.
CAUTION:
- When you pull out the front bumper, the font bumper could be damaged by the projection (A).
  
  Fig 4: Pulling Out Front Bumper
  Courtesy of HYUNDAI MOTOR CO.
Disconnect the connector (A).

Fig 5: Identifying Front Bumper Connector
Courtesy of HYUNDAI MOTOR CO.
Installation is the reverse of removal.