LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2011 >> Sonata GLS, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat & Power Seat - Except HEV >> Front Seat >> Repair Procedures >> Replacement >> Seat Frame Replacement

Seat Frame Replacement

  1. Remove the front seat assembly.
  2. Remove the seat back cover.
  3. Remove the seat cushion cover.
  4. After loosening the mounting screw, then remove the front seat shield cover (A).
    Fig 1: Identifying Front Seat Shield Cover
    G07359669Courtesy of HYUNDAI MOTOR CO.
  5. After loosening the mounting bolts, then disconnect the seat back frame (A) and seat cushion frame (B).
    NOTE:
    • Remove the side air bag for replacing side air bag installation seat.
    • Before service, be fully aware of precautions and service procedure relevant to air bag (Refer to AIRBAG )

    Tightening torque: 

    44.1 ~ 58.8 N.m (4.5 ~ 6.0 kgf.m, 32.5 ~ 43.4 lb-ft)

    Fig 2: Identifying Seat Back Frame And Seat Cushion Frame
    G07359670Courtesy of HYUNDAI MOTOR CO.
  6. Installation is the reverse of removal.
    NOTE:
    • Be sure to perform PODS re-zero with the GDS after replacing parts (passenger's) (Refer to AIRBAG )
scientia non olet · About LEMON Manuals