Recliner Cover Replacement

Remove the recliner switch (A) and height switch (B).

Fig 1: Identifying Recliner Switch And Height Switch
Courtesy of HYUNDAI MOTOR CO.
After loosening the mounting screws, then remove the recliner center cover (A).

Fig 2: Identifying Recliner Center Cover With Mounting Screws
Courtesy of HYUNDAI MOTOR CO.
After loosening the mounting screws, and then remove the recliner cover (A).

Fig 3: Identifying Recliner Cover With Mounting Screws
Courtesy of HYUNDAI MOTOR CO.
Disconnect the connector (A).

Fig 4: Identifying Seat Connector
Courtesy of HYUNDAI MOTOR CO.
Installation is the reverse of removal.
NOTE:
- Be sure to perform PODS re-zero with the GDS after replacing parts (passenger's) (Refer to AIRBAG )