Cluster Fascia Replacement

NOTE:

When prying with a flat-up screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Put on gloves to protect your hands.

Remove the crash pad side cover (A).

Fig 1: Identifying Crash Pad Side Cover
Courtesy of HYUNDAI MOTOR CO.
After loosening the mounting screws, remove the lower panel (A).

Fig 2: Identifying Lower Panel With Mounting Screws
Courtesy of HYUNDAI MOTOR CO.
After loosening the mounting screws, remove the cluster fascia panel (A).

Fig 3: Identifying Cluster Fascia Panel With Mounting Screws
Courtesy of HYUNDAI MOTOR CO.
After loosening the mounting screws, remove the cluster (A).

Fig 4: Identifying Cluster With Mounting Screws
Courtesy of HYUNDAI MOTOR CO.
Disconnect the connector (A).

Fig 5: Identifying Connector
Courtesy of HYUNDAI MOTOR CO.
Installation is the reverse the removal.
NOTE:
- Make sure the connector is connected properly.