LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2011 >> Genesis 4.6 >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Interior Trim >> Crash Pad >> Replacement >> Center Fascia Panel Replacement

Center Fascia Panel Replacement

  1. Remove the crash pad side cover.
  2. Remove the lower panel.
  3. Remove the cluster fascia panel.
  4. After loosening the crash pad side garnish mounting screws, remove the side garnish (A).
    Fig 1: Identifying Side Garnish With Crash Pad Side Garnish Mounting Screws
    G06102794Courtesy of HYUNDAI MOTOR CO.
  5. After loosening the center fascia panel mounting screws, remove the center fascia panel (A).
    Fig 2: Identifying Center Fascia Panel With Mounting Screws
    G06102795Courtesy of HYUNDAI MOTOR CO.
  6. Disconnect the connector (A).
    Fig 3: Identifying Connector
    G06102796Courtesy of HYUNDAI MOTOR CO.
  7. Installation is the reverse of removal.
scientia non olet · About LEMON Manuals