LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2011 >> Genesis 3.8 >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat & Seat Belt >> Seat & Power Seat >> Front Seat >> Replacement >> Seat Cushion Cover Replacement

Seat Cushion Cover Replacement

  1. Remove front seat assembly.
  2. Remove the recliner cover.
  3. After disconnect the protector (A), remove the seat cushion (B).
    Fig 1: Identifying Protector & Seat Cushion
    G06103474Courtesy of HYUNDAI MOTOR CO.
  4. After removing the hog-ring clips on the front of seat cushion and remove the seat cushion cover (A).
    Fig 2: Identifying Seat Cushion Cover
    G06103475Courtesy of HYUNDAI MOTOR CO.
  5. Installation is the reverse of removal.
    NOTE:
    • Be sure to perform PODS re-zero with Hi-scan (PRO) after replacing parts (Passenger's)

      (Refer to AIR BAG MODULE )