LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2011 >> Genesis 3.8 >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Indicators And Gauges >> Instrument Cluster >> Inspection >> Main Fuel Gauge Sender

Main Fuel Gauge Sender

  1. Using an ohmmeter, measure the resistance between terminals 1 and 3 of sender connector (A) at each float level.
    Fig 1: Measuring Resistance Between Terminals 1 And 3 Of Sender Connector Float Level
    G06103867Courtesy of HYUNDAI MOTOR CO.
  2. Also check that the resistance changes smoothly when the float is moved from "E" to "F"
    RESISTANCE SPECIFICATION

    Position Resistance (Ω)
    Sender (E) 183 ± 2.5
    Warning lamp 175 ± 2.5
    1/2 99 ± 2.5
    Sender (F) 15 ± 2
  3. If the height resistance is unsatisfactory, replace the fuel sender as an assembly.
    CAUTION: After completing this test, wipe the sender dry and reinstall it in the fuel tank.
scientia non olet · About LEMON Manuals