LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2011 >> Equus Signature >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Interior Trim & Instrument Panel >> Windshield Glass >> Repair procedures >> Removal

Repair procedures: Removal

NOTE:
  • Put on gloves to protect your hands.
  • Use seat covers to avoid damaging any surfaces.
  1. Remove the following items.
    1. Front pillar trim
    2. Inside rear view mirror
    3. Wiper arm
    4. Engine room cover

      (Refer to the "COWL TOP COVER ")

    5. Cowl top cover
    6. Windshield glass heater connector.

    (Refer to "WINDSHIELD WIPER ")

  2. Remove the windshield glass side molding.
  3. Cut out the windshield sealant using the sealant cutting tool (A) (09861-31100).
    Fig 1: Cutting Windshield Sealant Using Sealant Cutting Tool (09861-31100)
    G07312488Courtesy of HYUNDAI MOTOR CO.
  4. Remove the windshield (B) carefully using the glass holder (A).
    Fig 2: Removing Windshield Using Glass Holder
    G07312489Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals