Repair Procedures: Inspection: Speedometer
- Adjust the pressure of the tires to the specified level.
- Drive the vehicle onto a speedometer tester. Use wheel chocks as appropriate.
- Check if the speedometer indicator range is within the standard values.
CAUTION:
Do not operate the clutch suddenly or increase/decrease speed rapidly while testing.
NOTE:
Tire wear and tire over or under inflation will increase the indication error.
INSTRUMENT CLUSTER SPECIFICATIONS - CANADA
| Velocity (km/h) |
20 | 40 | 60 | 80 | 100 | 120 |
| Tolerance (km/h) |
+3.8 +0.2 |
+3.8 +0.4 |
+5.0 +0.6 |
+6.0 +0.8 |
+7.6 +1.0 |
+8.2 +1.2 |
| Velocity (km/h) |
140 | 160 | 180 | 200 | 220 | 240 |
| Tolerance (km/h) |
+8.6 +1.2 |
+9.2 +1.4 |
+9.4 +1.4 |
+10.2 +1.8 |
+10.4 +2.0 |
+10.4 +2.0 |
INSTRUMENT CLUSTER SPECIFICATIONS - USA
| Velocity (MPH) |
10 | 20 | 40 | 60 |
| Tolerance (MPH) |
+2.5 -1.0 |
+2.5 -1.0 |
+2.5 -1.0 |
+2.5 -1.0 |
| Velocity (MPH) |
80 | 100 | 120 | 140 |
| Tolerance (MPH) |
+2.5 -1.0 |
+3.0 -1.0 |
+3.0 -1.0 |
+3.0 -1.0 |