LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2011 >> Accent GL >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Indicators And Gauges >> Instrument Cluster >> Repair procedures >> Replacement

Repair procedures: Replacement

  1. Disconnect the negative (-) battery terminal.
  2. Remove the cluster facia panel (B) after disconnecting the connector of trip switch (A) and loosening the 2 screws take care of fixing clips (C).
    Fig 1: Identifying Cluster Facia Panel, Trip Switch Connector And Fixing Clips
    G06882583Courtesy of HYUNDAI MOTOR CO.
  3. Pull out the cluster (A) from the housing after removing 4 screws.
    Fig 2: Identifying Cluster With Screws
    G06882584Courtesy of HYUNDAI MOTOR CO.
  4. Disconnect the cluster connector (A) and then remove the cluster.
    Fig 3: Identifying Cluster Connector
    G06882585Courtesy of HYUNDAI MOTOR CO.
  5. Installation is the reverse of removal.
scientia non olet · About LEMON Manuals