LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2010 >> Azera Limited >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Interior >> Crash Pad >> Repair procedures >> Replacement >> Cluster Replacement

Cluster Replacement

  1. Remove the cluster fascia panel.
  2. Loosen the screws.
  3. Disconnect the cluster connector, then remove the cluster (A).
    Fig 1: Identifying Cluster With Mounting Screws
    G06802163Courtesy of HYUNDAI MOTOR CO.
  4. Installation is the reverse of removal.
    NOTE:
    • Make sure the connector is plugged in properly.
    Fig 2: Identifying Cluster Connector
    G06802164Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals