LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2010 >> Azera Limited >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Interior >> Crash Pad >> Repair procedures >> Replacement >> Center Fascia Panel Replacement

Center Fascia Panel Replacement

NOTE:
  • When prying with a flat-up screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
  • Put on gloves to protect your hands.
  1. Remove the crash pad side cover.
  2. Remove the lower crash pad panel.
  3. Remove the center garnish (A).
    Fig 1: Identifying Center Garnish With Clips
    G06802160Courtesy of HYUNDAI MOTOR CO.
  4. Loosening the crash pad center fascia panel mounting screws.
  5. After disconnecting the connector, remove center fascia panel (A).
    Fig 2: Identifying Center Fascia Panel With Mounting Screws
    G06802161Courtesy of HYUNDAI MOTOR CO.
  6. Installation is the reverse of removal.
    NOTE:
    • Make sure the connector is plugged in properly.
scientia non olet · About LEMON Manuals