LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2010 >> Azera GLS >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Indicators And Gauges >> Instrument Cluster >> Repair procedures >> Replacement

Repair procedures: Replacement

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad center garnish (A) (Refer to CRASH PAD )
    Fig 1: Identifying Crash Pad Center Garnish
    G06802415Courtesy of HYUNDAI MOTOR CO.
  3. Remove the center fascia panel (A) after disconnecting connectors and loosening screws.
    Fig 2: Identifying Center Fascia Panel
    G06802416Courtesy of HYUNDAI MOTOR CO.
  4. Remove the cluster fascia panel after disconnecting trip switch connector.
    Fig 3: Identifying Cluster Fascia Panel
    G06802417Courtesy of HYUNDAI MOTOR CO.
  5. Pull out the cluster (A) from the housing after removing 4 screws.
    Fig 4: Identifying Cluster
    G06802418Courtesy of HYUNDAI MOTOR CO.
  6. Disconnect the cluster connector (A) and then remove the cluster.
    Fig 5: Identifying Cluster Connectors
    G06802419Courtesy of HYUNDAI MOTOR CO.
  7. Installation is the reverse of removal.
scientia non olet · About LEMON Manuals