LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2010 >> Azera GLS >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Indicators And Gauges >> Instrument Cluster >> Repair procedures >> Inspection >> Trip Switch

Trip Switch

  1. Disconnect the negative (-) battery terminal.
  2. Remove the trip switch (A) from the cluster fascia panel (B).
    Fig 1: Identifying Trip Switch Connector
    G06802413Courtesy of HYUNDAI MOTOR CO.
  3. Check for continuity between the terminals in each switch position according to the table.
    Fig 2: Terminal Continuity Chart
    G06802414Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals