LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2010 >> Azera GLS >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Indicators And Gauges >> Instrument Cluster >> Repair procedures >> Inspection >> Speedometer

Repair procedures: Inspection: Speedometer

  1. Adjust the pressure of the tires to the specified level.
  2. Drive the vehicle onto a speedometer tester. Use wheel chocks as appropriate.
  3. Check if the speedometer indicator range is within the standard values.
    CAUTION: Do not operate the clutch suddenly or increase/decrease speed rapidly while testing.
    NOTE: Tire wear and tire over or under inflation will increase the indication error.
    Fig 1: Identifying Wheel Chocks
    G06802400Courtesy of HYUNDAI MOTOR CO.

    [km/h - CANADA] 

    SPEEDOMETER INDICATOR RANGE - CANADA

    Velocity (km/h) 20 40 60 80 100 120
    Tolerance (km/h) +3.8
    +0.2    		 +3.8
    +0.4    		 +5.0
    +0.6    		 +6.0
    +0.8    		 +7.6
    +1.0    		 +8.2
    +1.2
    Velocity (km/h) 140 160 180 200 220 240
    Tolerance (km/h) +8.6
    +1.2    		 +9.2
    +1.4    		 +9.4
    +1.4    		 +10.2
    +1.8    		 +10.4
    +2.0    		 +10.4
    +2.0

    [MPH - USA] 

    SPEEDOMETER INDICATOR RANGE - USA

    Velocity (MPH) 10 20 40 60
    Tolerance (MPH) +2.5
    -1.0    		 +2.5
    -1.0    		 +2.5
    -1.0    		 +2.5
    -1.0
    Velocity (MPH) 80 100 120 140
    Tolerance (MPH) +2.5
    -1.0    		 +3.0
    -1.0    		 +3.0
    -1.0    		 +3.0
    -1.0
scientia non olet · About LEMON Manuals