Installtion

Installation

Water Pump
1. Install the water pump.
(1) Install the water pump (B) and a new gasket with the 3 bolts(D).

Tightening torque
19.6 - 26.5Nm (2.0 - 2.7kgf.m, 14.5 - 19.5lb-ft)





(2) Install the alternator brace (A) with the 2 bolts (C).

Tightening torque
19.6 - 23.5Nm (2.0 - 2.4kgf.m, 14.5 - 17.4lb-ft)


(3) Install the 4 bolts and pump pulley.

Tightening torque
7.8 - 9.8Nm (0.8 - 1.0kgf.m, 5.8 - 7.2lb-ft)





2. Install the timing belt idler and the timing belt.
3. Install drive belts.
4. Fill with engine coolant.
5. Start engine and check for leaks.
6. Recheck engine coolant level.