Scantool Diagnostics
Monitor Scantool Data
1. Park the vehicle on a level surface.
2. Set up 'GDS' with 'GDS TPMS'.
3. Select the "TPMS" system.
4. Execute "DTC Analysis" mode.
5. Check the present DTC.
6. Are there any DTC's except for 'C1662' ?
Monitor Scantool Data
1. Park the vehicle on a level surface.
2. Set up 'GDS' with 'GDS TPMS'.
3. Select the "TPMS" system.
4. Execute "DTC Analysis" mode.
5. Check the present DTC.
6. Are there any DTC's except for 'C1662' ?