LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2009 >> Elantra L4-2.0L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Testing and Inspection >> Component Tests and General Diagnostics >> Idle Speed Control Actuator (ISCA) >> Component Inspection

Component Inspection





Component Inspection

1. Turn ignition switch OFF.
2. Disconnect ISCA connector.
3. Measure resistance between ISCA terminals 2 and 1 [Opening Coil].
4. Measure resistance between ISCA terminals 2 and 3 [Closing Coil].
5. Check that the resistance is within the specification.

Specification:Refer to SPECIFICATION.


scientia non olet · About LEMON Manuals