LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2009 >> Elantra L4-2.0L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Testing and Inspection >> Component Tests and General Diagnostics >> Canister Close Valve (CCV) >> Component Inspection

Component Inspection





Component Inspection

1. Turn ignition switch OFF.
2. Disconnect CCV connector.
3. Measure resistance between CCV terminals 1 and 2.
4. Check that the resistance is within the specification.

Specification :Refer to SPECIFICATION


scientia non olet · About LEMON Manuals